​​​​​​​Main Standard Drafter For Heat Pump Dryer In China
Language
VR

Clove Dryer Machine | AIM Heat Pump Drying Machine

Clove can be used as a spice and Chinese medicine. Both of these methods require the cloves to be dried and then used, so many growers use a dryer to treat the cloves. Our clove dryer machine is loved by many customers because our machines can save a lot of manpower and energy. Simply put the cloves into the drying room, set the required temperature and humidity on the PLC control panel outside the machine, the machine will dry on its own, no need to manually stay and observe, the machine will reach its own temperature and stop running.


The clove drying machine is an air energy heat pump dryer specially developed for the spices and medicinal herbs, to ensure that the cloves completely retain the medicinal properties and quality of the medicinal materials during the drying process, and the cloves after drying are not deformed , no cracking, no discoloration, no deterioration.

 

Clove Drying Process

1. Before drying with a clove dryer, the color of the material must be fixed so that the color after drying meets the requirements. Soak the cloves in near-boiling water for about 3 minutes. When the clove is slightly yellow, pick it up, pour it into the dryer and open the control panel for drying.

 

2. Carry out the drying operation, adjust the clove heat pump dryer to drying mode, adjust the temperature to 60 ℃, and dry for 1 hour. Note that dehumidification is not required at this stage, mainly for color control.

 

3. Adjust the drying mode of the clove heat pump dryer to drying and dehumidification, adjust the temperature to 55 ℃, and dry for 3 hours. Note that a lot of dehumidification is required at this stage.

 

4. Keep drying and dehumidification mode, adjust the temperature to 50℃, and dry for 3 hours. Note that a lot of dehumidification is required at this stage.

 

5. Continue to maintain the drying and dehumidification mode, adjust the temperature to 45°C, and dry for 3 hours. Note that there is relatively little moisture at this stage, and it can be slowly dehumidified

 

6. Adjust the mode to drying mode, adjust the temperature to 65°C, and dry for 2 hours. The drying program ends.

 

                                                                


 The clove drying machine advantages:

1.Improve the efficiency of the finished products and reduce the defect rate.

2. Can save 40% labor cost and 70% energy consumption.

3.Dried clove is good quality, large yield and high added value.

4.Clove drying environment is clean, no waste gas, waste water and waste residue discharge.

5. It has a wide range of applications and is not limited by climate and environment.

6. With the function of temperature and humidity adjustment and high control precision, it can meet the needs of the high-end market.



AIM Heat Pump Industrial Clove Drying Machine-----Click here to choose


AGHD-30ELC AIM Heat Pump Industrial Clove Dryer Machine For Sale

Quick and Gentle Drying

Model Number: AGHD-30ELC

Material Loading Capacity: 100-400kg

Energy consumption: 3kw/h

Temperature range: 18C to 80C

Material of trays: stainess steel 304


AIM Cabinet Dryer Machine is the easiest operation heat pump dryer/dehydrator, plug in and play. It with intelligent control panel, no need installation, also with wheels to move. View Equipment →

AIM AGHD-70ELk Heat Pump Industrial Clove Dehydrator Machine

Quick and Gentle Drying

Model Number: AGHD-70ELC

Loading Capacity: 500-700kg,can combine to much more bigger capacity

Energy consumption: 12kw/h

Temperature range: 18C to 80C

Drying room size: can be customized

Material of chamber walls: SS304

Material of trolleys and trays:SS304

 

For big capacity, dryer machine contact with dying chamber. Anti-rust stainless steel drying machine. Drying chamber, Portion board, trolleys and Trays all with food grade SS304. View Equipment 


AGHD-15ELC AIM Dry Clove Dehydrator Heat Pump Dryer Small Spice Drying Machine 

Quick and Gentle Drying

Model Number: AGHD-15ELC
Material Loading Capacity: 100-150kg
Energy consumption: 2kw/h
Temperature range: 18C to 80C
Material of trays: stainess steel 304

 View Equipment →


Product: Dryera Heat Pump Clove Drying Machine

Quick and Gentle Drying

Model Number: DPR-15

Loading Capacity: 3000kg-10,000kg, can combine to much more bigger capacity

Energy consumption: 18.8-41.5kw/h

Temperature range: 18C to 75C

Drying room size: can be customized

Material of chamber walls:SS304          

 View Equipment →




Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Send your inquiry

Choose a different language
English
Deutsch
Español
ภาษาไทย
Tiếng Việt
bahasa Indonesia
العربية
русский
हिन्दी
français
Português
italiano
Türkçe
한국어
Current language:English