AIM Heat Pump Food Drying Machine - Big Capacity Commercial Dehydrator

Product: AIM Heat Pump Food Drying Machine

Quick and Gentle Drying

Model Number: DPR-15

Loading Capacity:3000-10,000kg,can combine to much more bigger capacity

Energy consumption: 18.8-41.5kw/h

Temperature range: ambient- 75C

Drying room size: can be customized

Material of chamber walls:SS304

Material of trolleys and trays：SS304              

               

This dehydrator machine mainly for the big capacity, from 3,000kg to 10,000kg optional.

               

This type the dryer machine and drying room are separated, the drying bin are separate, and the size can be customized. It is flexible with different size and products dying, even can match with the current bin of clients.

               

This one is very easy to install, because the dryer machine already with big fans, just connect the dyer machine part and the bin part is ok. Easy to load and unload the products.

               

Use heat pump technology which can saves 75% electricity

               

Compact size, save the space a lot and can load more products                

               

It is optional that use the small drying bin to load the products 

and then put into the room for the drying.

               

This way is is easy to transfer the products, like with a lot of 

portable small trolleys.

The new heat pump technology used in the drying industry is a major breakthrough, which saves the operation cost up to 75%. The difference similar as the traditional electric water heater and the heat pump water heater, because heat pump is to transfer the heat in the air from outside to the chamber inside.                                                                                             

Bellowing is the electricity consumption in different dryers:

           

Digital PLC control board easy to set your parameters 

like drying temperature, humidity and drying time etc.

Smart module control system, automatic regulation 

and a 24 - hour unattended operation.       

               

Patented negative pressure fan design, the products can be dried 100% evenly

               

No need tools to open the panel and check each parts if need any inspect or repair

               

Thumbnail label

Verbal communication include sounds, words

               

Inside of the drying bin optional with SS304 or coated steel

The size of drying bin can be customized

Comparison of Different Heat Pump Dryer

AIM

VS	AIM Open and closed loop	Open loop	Closed loop
Temp. Range	18-80℃	18-80℃	Ambient temp. to 65℃
Heat Dry	Yes	Yes	Yes
Cool Dry	Yes	Yes	No
Dehumidify	Yes	No	Yes
Energy saving under begining drying stage(humidity>30%) ?	Yes	No	Yes
Energy saving under nending drying stage(humidity<30%) ?	Yes	Yes	Need more electricity than  traditonal electric heater type
Precise control of temperature?	Yes	Yes	No
Precise control of humidity?	Yes	No	Yes
Still effiency if ambient temp. less than 10℃?	Firstly use open loop to increase temp.  to 30C quikcly, then switch to closed loop to acheive the highest  efficiency	Very low efficiency	Very low efficiency
Can collect 100% hydrolat for flowers, herbs etc.?	Yes	Yes	No

Fruit Dehydrate

Nuts Dehydrate

Fish Dehydrate

Timber Drying

Sausage&Meat Dehydrate

Pet Food Dehydrate

Flowers and Leaves Dehydrate

Pasta&Noodles Dehydrate

Spices Dehydrate

Vegetable Dehydrate

Open and Closed Loop

Open and closed loop heat pump dryer mean you can choose open or closed loop as your need. Open loop is similar as air conditioner, mainly to use cool dry or hot dry. Closed loop mainly for the dehumidification funtion. Normally choose the closed loop for the begining, because the products with high humidity at the begining. Once the humidity precentage decease, then change to open loop, which use a higher temperature to dry the products until full dried.

Of course, the machine can choose open or closed loop automatically once you set the tempeature and humidity required. For example, for the fish drying, it need to be sealed(no bad odor comes out), and the drying tempeature is around 20C. Then the machine will mainly use closed loop to dehumidify, but if the tempeature is higher than 20C, will chang to open loop automatically to decrease the tempeature, then change back to closed loop once tempeature is down.

Click here to know more about advantage the heat pump dryer!!!

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --