With strong R&D strength and production capabilities, AIM now has become a professional manufacturer and reliable supplier in the industry. All our products including Hot Air Drying Machine are manufactured based on the strict quality management system and international standards. Hot Air Drying Machine If you are interested in our new product Hot Air Drying Machine and others, welcome you to contact us.This product boasts a top-notch compressor and cutting-edge noise reduction technology. Customers love its dependable operation, impressive efficiency, and minimal noise. (Hot Air Drying Machine)
Product: AIM Heat Pump Food Drying Machine
Quick and Gentle Drying
Model Number: JMHPK-50CTCL
Loading Capacity:3000-10,000kg,can combine to much more bigger capacity
Energy consumption: 18.8-41.5kw/h
Temperature range: ambient -75C
Drying room size: can be customized
Material of chamber walls:SS304
Model | JMHPK-50CTCL | JMHPK-75CTCL | JMHPK-100CTCL | |
Temp. Control | ℃ | ambient-75c | ambient-75c | ambient-75c |
Dehumi. Capacity | L/h | 35~45 | 55~75 | 85-105 |
Functions | Heat dry, Cool dry, Dehumidify | Heat dry, Cool dry, Dehumidify | Heat dry, Cool dry, Dehumidify | |
Performance | ||||
Rated Power Input | kW | 18.8 | 29.4 | 41.5 |
Rated Current Input | A | 37.3 | 58.4 | 78.8 |
Voltage/Frequency | V,HZ | 380V/50HZ/60Hz | 380V/50HZ/60Hz | 380V/50HZ/60Hz |
Emergency Auxiliary Heating Power Input | kW | 18 | 30 | 30 |
Refrigerant Type | R134a | R134a | R134a | |
Weight and packing | ||||
Operation ambient Temp. | ℃ | -5-50 | -5-50 | -5-50 |
Weight | kg | 950 | 1200 | 1500 |
Machine Dimension(L*W*H) | mm | 1610*1950*2280 | 2000*1950*2480 | 2700*1950*2480 |
Products introduction
The new heat pump technology used in the drying industry is a major breakthrough, which saves the operation cost up to 75%. The difference similar as the traditional electric water heater and the heat pump water heater, because heat pump is to transfer the heat in the air from outside to the chamber inside.
Bellowing is the electricity consumption in different dryers:
Heating method | Electric heater | Coal boiler | Coal-fired boiler | Natural gas boiler | Nomal HPD | Our HPD |
Calories required to remove 1kg of water | According to relevant authoritative information, the average heat required to remove 1kg of water is 1.35kw/kg, or 1161kcal/kg | |||||
Fuel type | Electricity | Coal | Diesel fuel | Natural gas | Electricity | Electricity |
Burning value | 860kcal/kwh | 5500kcal/kg | 8000kcal/L | 8600kcal/m3 | 860kcal/kwh | 860kcal/kwh |
Thermal efficiency | 95% | 30% | 85% | 85% | 300% | 500% |
Effective calorific value | 817kcal | 1650kcal | 6800kcal | 7310kcal | 2580kcal | 4300kcal |
unit price of fuel | 0.6yuan/kwh | 1yuan/kg | 7.4yuan/L | 5yuan/m3 | 0.6yuan/kwh | 0.6yuan/kwh |
consume fuel | 0.852kwh | 0.7kg | 0.17L | 0.159m3 | 0.27kwh | 0.162kwh |
running cost | 0.852 | 0.7 | 1.26 | 0.795 | 0.27 | 0.162 |
labor cost | Meddium | High | High | High | Meddium | Low |
Safety performance | Not safe | Not safe | Not safe | Not safe | Not safe | Safe |
Environmental pollution | No | very serious | quite serious | quite serious | No | No |
Equipment service life | 5-8 years | 6-9years | 6-9years | 6-9years | 6-10years | 10-15years |
Comparison of Different Heat Pump Dryer
VS | AIM Open and closed loop | Open loop | Closed loop |
Temp. Range | 18-80℃ | 18-80℃ | Ambient temp. to 65℃ |
Heat Dry | Yes | Yes | Yes |
Cool Dry | Yes | Yes | No |
Dehumidify | Yes | No | Yes |
Energy saving under begining drying stage(humidity>30%) ? | Yes | No | Yes |
Energy saving under nending drying stage(humidity<30%) ? | Yes | Yes | Need more electricity than |
Precise control of temperature? | Yes | Yes | No |
Precise control of humidity? | Yes | No | Yes |
Still effiency if ambient temp. less than 10℃? | Firstly use open loop to increase temp. | Very low efficiency | Very low efficiency |
Can collect 100% hydrolat for flowers, herbs etc.? | Yes | Yes | No |
Open and Closed Loop
Open and closed loop heat pump dryer mean you can choose open or closed loop as your need. Open loop is similar as air conditioner, mainly to use cool dry or hot dry. Closed loop mainly for the dehumidification funtion. Normally choose the closed loop for the begining, because the products with high humidity at the begining. Once the humidity precentage decease, then change to open loop, which use a higher temperature to dry the products until full dried.
Of course, the machine can choose open or closed loop automatically once you set the tempeature and humidity required. For example, for the fish drying, it need to be sealed(no bad odor comes out), and the drying tempeature is around 20C. Then the machine will mainly use closed loop to dehumidify, but if the tempeature is higher than 20C, will chang to open loop automatically to decrease the tempeature, then change back to closed loop once tempeature is down.
Click here to know more about advantage the heat pump dryer!!!
Zhongshan AIM Energy Saving Technology Co., Ltd always considers communicating through phone calls or video chat the most time-saving yet convenient way, so we welcome your call for asking for the detailed factory address. Or we've displayed our e-mail address on the website, you are free to write an E-mail to us about the factory address.
Yes, if asked, we will supply relevant technical details regarding AIM. Basic facts about the products, such as their primary materials, specs, forms, and primary functions, are readily available on our official website.
In China, ordinary working time is 40 hours for employees who work full time. In Zhongshan AIM Energy Saving Technology Co., Ltd, most employees work abiding by this kind of rule. During their duty time, each of them devotes their full concentration to their work so as to provide customers with the highest-quality Penetration Type Dryer Machine and an unforgettable experience of partnering with us.
The buyers of Hot Air Drying Machine come from many businesses and nations around the world. Before they begin working with the manufacturers, some of them may reside thousands of miles away from China and have no knowledge of the Chinese market.
The application of the QC process is crucial for the quality of the final product, and every organization needs a strong QC department. Hot Air Drying Machine QC department is committed to continual quality improvement and focuses on ISO Standards and quality assurance procedures. In these circumstances, the procedure may go more easily, effectively, and precisely. Our excellent certification ratio is a result of their dedication.
Regarding the attributes and functionality of the Hot Air Drying Machine, it is a kind of product that will always be in vogue and offer consumers limitless benefits. It can be a long-lasting friend for people because it is constructed from high-quality raw materials and has a lengthy lifespan.